CUTTING EDGES AND SPECIAL PROFILES
Cutting edges are mainly intended for the production of components for earth moving machines
The range of long steel products also includes laminates for single-tooth track shoes, made in both the Pallanzeno and Giammoro plants, laminates for two and three-tooth track shoes, produced by Giammoro, and blades with one or two bevels, rolled in the Pallanzeno plant, and the rolling track, produced in Giammoro.
Cutting edges are mainly intended for the production of components for earth moving machines.
SECTOR OF USE
Earthmoving machines for the tractor and spare parts sector
Track shoes – Single grouser
Size L x A x B x C x H (mm)
from 180.0 x 9.0 x 47.0 x 7.0 x 56.0
to 200 x 11 x 47 x 8 x 58
Sez. (cm²) – Massa (Kg/m)
from 22.67 – 17.79
to 27,76 – 21,79
Track shoes – Double grouser
Size L x A x B x C x H (mm)
from 306.0 x 20.5 x 50.0 x 33.0 x 33.0 x 70.5
to 250.0 x 15.0 x 49.5 x 23.0 x 23.0 x 64.5
Sez. (cm²) – Massa (Kg/m)
from 33.06 – 25.95
to 105.52 – 82.84
Track shoes – Triple grouser
Size L x A x B x C x D x E x H (mm)
from 163.0 x 9.0 x 18.0 x 15.0 x 15.0 x 15.0 x 27.0
to 240.0 x 15.0 x 26.5 x 26.0 x 18.0 x 26.0 x 41.5
Sez. (cm²) – Massa (Kg/m)
from 21.96 – 17.24
to 52.26 – 41.03
Cutting edges – Single bevel
Size width L x Thickness A (mm)
300 x 40
Sez. (cm²) – Massa (Kg/m)
113.98 – 89.47
Cutting edges – Double bevel
Size width L x Thickness A (mm)
from 203.0 x 16.0
to 406.0 x 35.0
Sez. (cm²) – Massa (Kg/m)
from 29.94 – 23.5
to 135.5 – 106.4
CONTACT
